Nodal Australia Distribution and WholesaleINSTEON Micro Relay (On/Off)
| Product code: IN2443-522 | |||
Quick-start guide
Image packAdd hidden on/off control of appliances or non-dimmable lighting zones with the INSTEON Micro Relay (On/Off). Its compact design allows for easy installation by the electrician behind switches or in other suitable locations. In addition to INSTEON control, the device features an input for control via a physical switch.
General |
|
| Product Name: | INSTEON Micro Relay (On/Off) |
| Product Code: | 2443-522 |
| Regions: | Australia and New Zealand |
| In the box: | INSTEON Micro Relay (On/Off) |
INSTEON |
|
| INSTEON Powerline Mesh Repeater: | Yes |
| INSTEON RF Mesh Repeater: | Yes |
| INSTEON Controller: | Yes |
| INSTEON Responder: | Yes |
| Maximum links/scenes: | 400 |
| Status LED: | Green / On, Red / Off, Blinks green or red during setup, Blinks red to indicate traffic (must be enabled via software) |
| LED brightness: | Adjustable from off to 100% bright |
| Beep on button press: | Beeps red to indicate traffic (must be enabled via software) |
| Local control: | Yes |
| Commands supported as controller: | On / Off, Fast On / Fast Off, Begin brighten / End brighten, Begin dim / End dim |
| Commands supported as responder: | On / Off, Fast On / Fast Off, Beep |
| Software configurable: | Yes |
| RF range: | Up to 50 meters feet open air |
| Phase detect beacon: | Yes |
| X10 support: | Yes |
| X10 addresses: | Any 1 of 256 (unassigned by default) |
| INSTEON device category: | 0x02 Switched Lighting Control |
| INSTEON device subcategory: | AUS / NZ (921.0 Mhz), 0x32 |
Mechanical |
|
| Mounting: | Behind switch or outlet, or above light fixture in single-gang electrical box | Casing: | UV stabalized plastic (INSTEON White) | Wire connections: | Sense 1 (yellow): 24 AWG, 0.205mm˛, Sense 2 (purple): 24 AWG, 0.205mm˛ | Max. wire size: | 4mm˛, 12 AWG (2.72mm diameter) | Min. cable size: | 1.5mm˛, 15 AWG | Screw clamp connections: | Line, Load 1, Load 1 (second terminal), Neutral | Set button: | Yes | Beeper: | Yes | Beep on button press: | Optional (off by default) | LED: | 1 RGB |
| Dimensions: | 46.6mm W x 17.5mm H x 46.6mm D |
| Weight: | 72g |
| Operating Conditions: | Indoors, 0° C to 40° C, up to 90% relative humidity |
Electrical |
|
| Voltage: | 100VAC to 240VAC (± 10%) |
| Frequency: | 50/60Hz auto-detected at power-up |
| Max. load: | 10A, 3600W/240VAC resistive, 700W/240VAC inductive/capacitive, 2000W/240VAC bulbs/low voltage halogen |
| Load types: | Resistive, Inductive/capacitive, Low voltage halogen |
| User replaceable fuse: | N/A |
| Retain all settings without power: | Yes, saved in non-volatile EEPROM |
| Standby power consumption: | <1W |
| Safety approved: | Approved for use in Australia and New Zealand |
| Certifications: | AS/NZS 4268, CISPR 22, IEC 60669-2-1 |
Nodal Australia do not supply directly to retail customers. To purchase this product please contact www.envioustechnology.com.au.
To locate other resellers please contact us.
If your business is in a compatible industry then you may be interested in becoming a reseller for Nodal Australia.