INSTEON Micro Motor Controller

Product code: IN2444-522

Product Description

Add hidden control for motorised projector screen, curtains, blinds or roller shutters with the INSTEON Micro Motor Controller. Its compact design allows for easy installation by the electrician behind switches or in other suitable locations. In addition to INSTEON control, the device features inputs enabling manual control via a physical switch.


Specifications

General

 
Product Name: INSTEON Micro Motor Controller
Product Code: 2444-522
Regions: Australia and New Zealand
In the box: INSTEON Micro Motor Controller
Warranty: 2 Years

INSTEON

 
INSTEON Powerline Mesh Repeater: Yes
INSTEON RF Mesh Repeater: Yes
INSTEON Controller: Yes
INSTEON Responder: Yes
Maximum links/scenes: 400
Load brightness levels: 32 locally (256 with software)
Status LED: Green / On, Red / Off, Blinks green or red during setup, Blinks red to indicate traffic (must be enabled via software)
LED brightness: Adjustable from off to 100% bright
Beep on button press: Beeps red to indicate traffic (must be enabled via software)
Local control: Yes
Commands supported as controller: On / Off, Fast On / Fast Off, Begin brighten / End brighten, Begin dim / End dim
Commands supported as responder: Open (On) / Close (Off), Begin raise (brighten) / / Begin lower (dim), End raise (brighten) / End lower (dim), Beep
Software configurable: Yes
RF range: Up to 50 meters feet open air
Phase detect beacon: Yes
X10 support: Yes
X10 addresses: Any 1 of 256 (unassigned by default)
INSTEON device category: 0x0E Window Coverings
INSTEON device subcategory: AUS / NZ (921.0 Mhz), 0x32

Mechanical

 
Mounting: Behind switch or outlet, or above light fixture in single-gang electrical box
Casing: UV stabalized plastic (INSTEON White)
Wire connections: Sense 1 (yellow): 24 AWG, 0.205mm˛, Sense 2 (purple): 24 AWG, 0.205mm˛
Max. wire size: 4mm˛, 12 AWG (2.72mm diameter)
Min. cable size: 1.5mm˛, 15 AWG
Screw clamp connections: Line, Load 1 (up), Load 2 (down), Neutral
Set button: Yes
Beeper: Yes
Beep on button press: Optional (off by default)
LED: 1 RGB
Dimensions: 46.6mm W x 17.5mm H x 46.6mm D
Weight: 72g
Operating Conditions: Indoors, 0° C to 40° C, up to 90% relative humidity

Electrical

 
Voltage: 100VAC to 240VAC (± 10%)
Frequency: 50/60Hz auto-detected at power-up
Max. load: 8A resistive, 3A motor
Load types: Resistive, Inductive/capacitive, Low voltage halogen, motor
Hardwired remote control: Yes, either latching or momentary switches supported
User replaceable fuse: N/A
Retain all settings without power: Yes, saved in non-volatile EEPROM
Standby power consumption: <1W
Safety approved: Approved for use in Australia and New Zealand
Certifications: AS/NZS 4268, CISPR 22, IEC 60669-2-1

Where to Buy

Nodal Australia do not supply directly to retail customers. To purchase this product please contact www.envioustechnology.com.au.

To locate other resellers please contact us.

If your business is in a compatible industry then you may be interested in becoming a reseller for Nodal Australia.