Nodal Australia Distribution and WholesaleINSTEON Plug-In Dimmer
| Product code: IN2632-522 | |||
Quick-start guide
Image packA full-featured plug-in dimmer that can be controlled using any INSTEON controller. Features an adjustable ramp rate, preset dim level and local control. Dual-mesh technology receives power-line and RF commands simultaneously.
General |
� |
| Product Name: | INSTEON Plug-In Dimmer |
| Product Code: | 2632-522 |
| Regions: | Australia and New Zealand |
| In the box: | INSTEON Plug-In Dimmer |
INSTEON |
� |
| INSTEON Powerline Mesh Repeater: | Yes |
| INSTEON RF Mesh Repeater: | Yes |
| INSTEON Controller: | Yes |
| INSTEON Responder: | Yes |
| Maximum links/scenes: | 400 |
| Load brightness levels: | 32 locally (256 with software) |
| Status LED: | Green / On, Red / Off, Blinks green or red during setup, Blinks red to indicate traffic (must be enabled via software) |
| LED brightness: | Adjustable from off to 100% bright |
| Local on-level: | Adjustable from 32 fixed brightness levels or resume dim |
| Local ramp rate: | Adjustable from 0.1 second to 5 seconds locally (0.1 seconds to 8 minutes with software) |
| Beep on button press: | Beeps red to indicate traffic (must be enabled via software) |
| Commands supported as controller: | On / Off, Fast On / Fast Off, Begin brighten / End brighten, Begin dim / End dim |
| Commands supported as responder: | On / Off, Fast On / Fast Off, Begin brighten / End brighten, Begin dim / End dim, Incremental brighten / Incremental dim, Beep |
| Software configurable: | Yes |
| RF range: | Up to 50 meters feet open air |
| Phase detect beacon: | Yes |
| X10 support: | Yes |
| X10 addresses: | Any 1 of 256 (unassigned by default) |
| INSTEON device category: | 0x01 dimmable lighting control |
| INSTEON device subcategory: | AUS / NZ (921.0 Mhz), 0x12 |
Mechanical |
� |
| Mounting: | Standard AC power outlet | Casing: | UV stabalized plastic (INSTEON White) | Set button: | Yes | Beeper: | Yes | Beep on button press: | Optional (off by default) | LED: | 1 RGB |
| Dimensions: | 43mm W x 108mm H x 35mm D |
| Weight: | 130g � 10g |
| Operating Conditions: | Indoors, 0� C to 40� C, up to 90% relative humidity |
Electrical |
� |
| Voltage: | 100VAC to 240VAC (� 10%) |
| Frequency: | 50/60Hz auto-detected at power-up |
| Max. load: | 300 W at 240VAC |
| Load types: | Lighting: Incandescent, dimmable LED, dimmable CFL, dimmable halogen |
| User replaceable fuse: | Yes |
| Retain all settings without power: | Yes, saved in non-volatile EEPROM |
| Standby power consumption: | <0.75W |
| Safety approved: | Approved for use in Australia and New Zealand |
| Certifications: | AS/NZS 4268, CISPR 22, IEC 60669-2-1 |
Nodal Australia do not supply directly to retail customers. To purchase this product please contact www.envioustechnology.com.au.
To locate other resellers please contact us.
If your business is in a compatible industry then you may be interested in becoming a reseller for Nodal Australia.